Insta Masonary Bond
Brick / Block Jointing Mortar
NRV Infra’s Insta Masonary Bond is a high-performance Brick Jointing Mortar designed for modern masonry construction. Manufactured using carefully selected cement, graded aggregates, and performance-enhancing additives, it provides strong and reliable bonding for AAC blocks, fly ash bricks, clay bricks, solid concrete blocks, and hollow concrete blocks.
Unlike conventional site-mixed cement mortar, Insta Masonary Bond delivers consistent quality, improved workability, and better adhesion across every batch. Its ready-mix formulation helps reduce material wastage, simplifies application, and supports faster construction progress.
Whether you are building residential homes, commercial complexes, industrial facilities, educational institutions, or infrastructure projects, Insta Masonary Bond offers a dependable solution for achieving durable and accurately aligned masonry walls.
As a trusted product from NRV Infra, it is widely used by builders, contractors, engineers, architects, and project developers looking for a reliable AAC Block Jointing Mortar that combines performance, consistency, and ease of application.
Advantages
- Easy and Fast Application.
- Pre-packed to overcome site batch variations.
- Water Seepage from joints are negligible.
- Easy in mixing as Instant Mortar.
- Convenient to store.
- Easy to Handle.
Block Jointing Mortar Technical Details
| Appearance | Powder Form | Efflorescence | Negligible |
| Colour | Grey | Bulk Density | 1650-1700 KG / M3 |
| Water for Mixing | 14 to 15% | Wet Density | 2000-2100 KG / M3. |
| Pot Life | Approx 90 to 120 mins. | Shelf Life | 6 months from the date of manufacturing in sealed condition. |
| Compressive Strength of mortar in 28 Days | 10Mpa to 12 Mpa | Packing Size | 40/50 Kg Bags |
Area of Application
- AAC Block Construction
- Fly Ash Brick Construction
- Clay Brick Masonry
- Concrete Block Walls
- Residential Buildings
- Commercial Projects
- Industrial Construction
- AAC Block Construction
- Fly Ash Brick Construction
- Clay Brick Masonry
- Concrete Block Walls
- Residential Buildings
- Commercial Projects
- Industrial Construction
Mixing and Application
- Clean the surface and remove dust or loose particles
- Prepare the first course using conventional mortar.
- Add 14–15% clean water and mix thoroughly.
- Allow the mix to stand for 2–3 minutes.
- Apply a uniform layer of mortar using a trowel.
- Place blocks/bricks and align properly.
- Remove excess mortar from joints.
- Avoid disturbing masonry for at least 24 hours.
- Use the mixed mortar within its pot life.
Do's
- 1. Use clean water for mixing.
- 2. Follow the recommended water ratio.
- 3. Mix thoroughly before application.
- 4. Ensure blocks and bricks are clean.
- 5. Check alignment during installation.
- 6. Store bags in a dry location.
- 7. Use the product within its pot life.
- 8. Protect masonry during initial setting.
- 9. Follow standard construction practices.
- 10. Use appropriate safety equipment.
Don'ts
- 1. Do not add excess water.
- 2. Do not use contaminated water.
- 3. Do not apply on dirty surfaces.
- 4. Do not remix hardened mortar.
- 5. Do not use expired material.
- 6. Do not expose bags to moisture.
- 7. Do not disturb freshly laid masonry.
- 8. Do not mix with other materials unless specified.
- 9. Do not apply during unsuitable site conditions without precautions.
- 10. Do not leave opened bags unsealed for extended periods.
Safety Measures
Safety Measures
- Wear protective gloves while mixing and applying mortar.
- Use safety goggles to prevent dust or splashes from entering the eyes.
- Wear a dust mask during handling and mixing operations.
- Use safety shoes at construction sites.
- Wear a helmet in accordance with site safety regulations.
- Use protective clothing to minimise skin contact.
FAQ's
Q1. What is AAC Block Jointing Mortar?
Answer: AAC Block Jointing Mortar is a ready-mix mortar designed specifically for joining AAC blocks using thin and uniform mortar joints.
Q2. What is Brick Jointing Mortar?
Answer: Brick Jointing Mortar is a bonding material used to join bricks and masonry units while providing strength and stability to walls.
Q3. How much water is required for mixing?
Answer: Approximately 14–15% clean water by weight is recommended for proper consistency.
Q4. Can Insta Masonary Bond be used for AAC blocks?
Answer: Yes. It is specifically formulated for AAC block construction and masonry applications.
Q5. Can it be used for fly ash bricks?
Answer: Yes. The product is suitable for fly ash bricks, clay bricks, and other masonry units.