Insta Masonary Bond

Brick / Block Jointing Mortar

Insta MASONARY BOND is a high-quality binding material that is designed for joining various types of masonary units such as blocks, fly ash bricks, and concrete blocks. It is a pre-mixed, instant dry mortar that is easy to use and provides superior strength.
Insta MASONARY BOND is a high-quality binding material that is designed for joining various types of masonary units such as blocks, fly ash bricks, and concrete blocks. It is a pre-mixed, instant dry mortar that is easy to use and provides superior strength.
Insta Masonary Bond makes it a reliable choice for masonary usage, as it ensures that the finished product is strong, durable, and long-lasting.

Advantages

  • Easy and Fast Application.
  • Pre-packed to overcome site batch variations.
  • Water Seepage from joints are negligible.
  • Easy in mixing as Instant Mortar.
  • Convenient to store.
  • Easy to Handle.

Technical Details

Appearance Powder Form Efflorescence Negligible
Colour Grey Bulk Density 1650-1700 KG / M3
Water for Mixing 14 to 15% Wet Density 2000-2100 KG / M3.
Pot Life Approx 90 to 120 mins. Shelf Life 6 months from the date of manufacturing in sealed condition.
Compressive Strength of mortar in 28 Days 10Mpa to 12 Mpa Packing Size 40/50 Kg Bags

Area of Application

  • Jointing Mortar for Fixing of All types of Bricks
  • AAC Blocks
  • Solid and Hollow Concrete Blocks
  • etc
  • Jointing Mortar for Fixing of All types of Bricks
  • AAC Blocks
  • Solid and Hollow Concrete Blocks
  • etc

Mixing and Application

  • Clean the surface to make it free from dust, loose particles and foreign material.
  • Place the first layer on floor using normal sand-cement mortar due to undulation in level of floor.
  • Lay the brick / blocks of first layer with proper levelling using sprit level, water tube, and other levelling tools.
  • Once first layer is set, now start second layer using Insta Masonary Bond thick bed mortar.
  • For mixing, mix Insta Masonary Bond jointing mortar with approx. 14-15% of water by weight.
  • Mix first for 5-10 minutes by hand or electrical mixer to mix homogeneously.
  • Allow mortar to stand for next 2-3 minutes so that additives react with water.
  • Wet the jointing surfaces of blocks before applying mortar.
  • Spread the mortar in such a way to maintain the thickness.
  • Do not disturb the wall after application of mortar for at least 24 hours. The setting time is affected by climatic conditions, allow more time accordingly.

Do's & Don'ts

  • 1. Use all the contents of Bags in one go, remaining material will get hard if in contact with air.
  • 2. Always at Powder to Water and never add water in powder.
  • 3. In first course of block laying, cement-sand mortar in the ratio of 1:4 or equivalent should be used. Check for perfect levelling of block course using sprit level. Give sufficient time to hard the joint in first course. Brick / Block once set must not be disturbed.
  • 4. After 1.2 meter, horizontal reinforced bond beam is recommended to provide strength and stability to wall and protection from cracks.
  • 5. Chicken mesh is recommended to use in concrete joints at corners, electrical junction boxes and conducting slots.
  • 6. For Long wall Vertical mullion to be provided at every 3meter.
  • 7. Hacking should be properly done on RCC surface before commencement of Block work.
  • 8. Maintain proper consistency of mix for proper adhesion.
  • 9. Top most gap of approx 15 – 20mm between wall and beam should be filled with lean concrete, backer rod etc.

Safety Measures

Use Hand Gloves
Goggles
Nose Mask
Safety Helmet
Safety Shoes
Jacket

Safety Measures

  • Use Hand Gloves, Goggles, Nose Mask, Safety Helmet, Shoes ad Jacket while carrying out the work.
  • In case of contact with eyes, wash with plenty of clean water and seek medical advice.
  • After finishing of work, wash hands using soap.

Interact With Us!

Request a Quote
Download Insta masonary bond brochure